9
To preset the same setting for all preset stations
1
Select an FM band.
2
Press
(AF/TA)
repeatedly until “AF ON,” “TA
ON” or “AF, TA•ON” appears.
Selecting “AF, TA•OFF” applies to non-RDS
stations as well as RDS stations.
3
Press
(BTM SENS)
until “BTM” flashes.
To preset different settings for each preset
station
1
Select an FM band, and tune in to the
desired station.
2
Press
(AF/TA)
repeatedly until “AF ON,” “TA
ON” or “AF, TA•ON” appears.
3
Press the desired number button (
(1)
to
(6)
)
until “MEM” appears.
Repeat from step 1 to preset other stations.
Tuning in to stations by
programme type
– PTY (Programme types)
You can tune in to a station by selecting the type of
programme you would like to listen to.
There are following programme types:
NEWS (news), AFFAIRS (current affairs),
INFO (information), SPORT (sports),
EDUCATE (education), DRAMA (drama),
CULTURE (culture), SCIENCE (science),
VARIED (varied), POP M (popular music),
ROCK M (rock music), EASY M (easy
listening), LIGHT M (light classical),
CLASSICS (classical), OTHER M (other music
type), WEATHER (weather), FINANCE
(finance), CHILDREN (children’s
programmes), SOCIAL A (social affairs),
RELIGION (religion), PHONE IN (phone in),
TRAVEL (travel), LEISURE (leisure), JAZZ
(jazz music), COUNTRY (country music),
NATION M (national music), OLDIES (oldies
music), FOLK M (folk music), DOCUMENT
(documentary)
Note
You cannot use this function in some countries/
regions where no PTY (Programme Type selection)
data is available.
1
Press
(PTY)
during FM reception.
The current programme type name appears if
the station is transmitting the PTY data.
“- - - - - - - -” appears if the received station is
not an RDS station, or if the RDS data is not
received.
2
Turn
(PUSH-MENU)
to select the desired
programme type.
“NONE” appears if the programme type is not
specified in the RDS data.
3
Press
(SEEK)
(+) or
(SEEK)
(–).
The unit starts searching for a station
broadcasting the selected programme type.
Setting the clock automatically
– CT (Clock Time)
The CT data from the RDS transmission sets the
clock automatically.
1
Press and hold
(PUSH-MENU)
until “SET”
appears on the display.
2
Press
(SEEK)
(+) or
(SEEK)
(–) to select “CT.”
3
Turn
(PUSH-MENU)
to select “CT ON.”
The clock is set.
To cancel “CT ON,” repeat the above and select
“CT OFF” at step 3.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time set
by the CT function and the actual time.
