124
(
1
)
Set the POWER switch to VCR on your camcorder.
(
2
)
On the connected VCR, locate just before the insert start point
[
a
]
, then press
X
to set the VCR to the playback pause mode.
(
3
)
On your camcorder, locate the insert end point
[
c
]
by pressing
m
or
M
.
Then press
X
to set your camcorder to the playback pause mode.
(
4
)
Press ZERO SET MEMORY on the Remote Commander. The ZERO SET
MEMORY indicator flashes and the end point of the insert is stored in
memory. The tape counter shows “0:00:00.”
(
5
)
On your camcorder, locate the insert start point
[
b
]
by pressing
m
. Press
z
REC and the button on its right simultaneously, then immediately press
X
to set your camcorder to the recording pause mode.
(
6
)
First press
X
on the VCR, and after a few seconds press
X
on your camcorder
to start inserting the new scene.
Inserting automatically stops near the zero point on the counter. Your
camcorder automatically stops. The end point
[
c
]
of the insert stored in
memory is canceled.
To change the insert end point
Press ZERO SET MEMORY again after step
(
5
)
to make the ZERO SET MEMORY
indicator disappear and begin from step
(
3
)
.
Inserting a scene from a VCR – Insert Editing
4
ZERO SET
MEMORY
5
0:00:00
ZERO SET
MEMORY
REC
PAUSE
