31
Recording
–
Basics
Note on the LOCK switch
When you slide the LOCK switch to the right, the POWER switch can no longer be set
to MEMORY accidentally. The LOCK switch is set to the left as the default setting.
Note on recording mode
Your camcorder records and plays back in the SP (standard play) mode or in the LP
(long play) mode. Select SP or LP in the menu settings (p. 219). In the LP mode, you can
record
longer
than in SP mode.*
1)
When you record a tape in the LP mode on your
camcorder, we recommend that you play back the tape on your camcorder.
To enable smooth transition
Transition between the last scene you recorded and the next scene is smooth as long as
you do not eject the cassette even if you turn off your camcorder.
However, check the following:
– Do not mix recordings in the SP mode and in the LP mode on one tape.
– When you change the battery pack, set the POWER switch to OFF (CHG).
If you leave your camcorder in the standby mode for a certain period
*
2)
while the
cassette is inserted
Your camcorder automatically turns off. This is to save battery power and to prevent
battery and tape wear. To resume the standby mode, set the POWER switch to OFF
(CHG) once, then turn it to CAMERA again. However, your camcorder does not turn
off automatically while the cassette is not inserted.
To set the counter to 0:00:00
Press COUNTER RESET (p. 259).
When you record in the SP and LP modes on one tape or you record some scenes
in the LP mode
•The time code may not be written properly between scenes.
•The transition between scenes may not be smooth.
•The playback picture may be distorted.
*
1)
1.5 times:
Twice:
*
2)
three minutes:
five minutes:
Recording a picture
