103
Additional information
Дополнительная информация
Symptom
The cassette cannot be removed
from the holder.
{
and
6
indicators flash and no
function except for cassette
ejection works.
The date or time indicator is
flashing.
The tape does not move when a
video control button is pressed.
The Steady Shot function does not
activate
.
The autofocusing function does
not work.
The fader function does not work.
No sound or only a low sound is
heard when playing back a tape
.
Excessive high-pitched sound is
heard
.
Data code becomes “--:--:--”.
The date or time indicator
disappears.
Cause and/or Corrective Action
• The battery is dead.
m
Use a charged battery pack or the AC power adaptor. (p. 7, 31)
• Moisture condensation has occurred.
m
Remove the cassette and leave the camcorder for at least 1
hour. (p. 97)
• You pressed DATE and TIME together for more than 2 seconds.
m
The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
• The lithium battery is weak or dead.
m
Replace the lithium battery with a new one. (p. 87)
• The POWER switch is set to CAMERA or OFF.
m
Set it to PLAYER.
• The tape has run out.
m
Rewind the tape or use a new one. (p. 25)
• STEADY SHOT is set to OFF.
m
Set STEADY SHOT to ON. (p. 63)
• The Steady Shot function does not work when the wide mode is
set to 16:9 FULL.
• FOCUS is set to MANUAL.
m
Set it to AUTO. (p. 57)
• Shooting conditions are not suitable for autofocus.
m
Set FOCUS to MANUAL to focus manually. (p. 57)
• The START/STOP MODE switch is set to 5SEC or
.
m
Set it to
. (p. 17)
• A title is displayed.
m
Stop superimposing the title. (p. 64)
• The stereo tape is played back with HiFi SOUND set to 1 or 2 in
the menu system.
m
Set to STEREO in the menu system. (p. 38)
• The picture has been recorded with WIND set to ON in the menu
system.
m
When there is no wind, set it to OFF. (p. 36)
• You are playing back a portion of tape on which you wrote or
erased the index signal. This is not a malfunction. (p. 79)
• Reset the date and time. (p. 89)
Cause and/or Corrective Action
Symptom
The image on the viewfinder
screen is not clear.
• The viewfinder lens is not adjusted.
m
Adjust the viewfinder lens. (p. 13)
Picture
(to be continued)
Trouble check