1-11 (E)
CA-950/950P IMM
1-5. Internal Switches Setting
1-5-1. IF-633 board
Ref. No.
Switch name
Description
Factory setting
S1-1 to 4
TEST OUT SELECT
Refer to the operation manual.
S1-1: OFF
S1-2 to 4: ON
S200-1
_
Factory use
OFF
S200-2
RET/SDI SEL
ON:
With return video selector such as CAC-6 connected to the
OFF
RET CONT connector, switching this switch ON can select the
SERIAL OUT signal.
To switch the SERIAL OUT output, use the control button of the
return video selector.
The setup menu for CCU determines the selection of signals.
n
With this switch set to ON, the return video selector functions only
for selecting the SERIAL OUT signal, and it cannot select the return
signal output to VF or TEST OUT of this unit.
To select the return signal output to VF or TEST OUT of this
unit, use the return video selection switch on the rear panel of this
unit, or on the camera handle, or the side of the camera.
OFF: Normal mode.
S201-1, 2,4
_
Factory use
OFF
S201-3
*
SETUP
Sets ON or OFF the setup function of the return video signal to be
OFF
output to VF or TEST OUT.
ON: Setup of 7.5 IRE is available.
OFF: Setup is unavailable.
*
: Only used for CA-950, not for CA-950P.
S1
S200
S201
CN1
A
B
C
D
1
2
3
4
IF-633 board (A side)
1-5. Internal Switches Setting
Содержание CA-950
Страница 24: ......
