14(E)
4
Tighten the slide lock knob
with a coin or screwdriver
(turn clockwise).
Slide lock knob
Fitting the Camera, Equipment and Accessories
Removing the studio lens
1
Loosen the slide lock knob (turn
counterclockwise).
2
Pick up the rear of the camera, and turn the lens
locking lever upward.
3
Lift the camera up and pull backward to disengage
the camera’s lens mount from the mount joint.
4
Pull the camera to the far rear, and tighten the slide
lock knob (turn counterclockwise).
5
Disconnect all the cables and then remove the
camera. The lock is released when you pull the
lever on the camera mount holding the red button
on the lever.
6
Remove the lens.
Note
When using a manual control lens, be sure to remove
the push rod before removing the lens.
