remembers the network and automatically connects to it the next time you come within
range.
Some Wi-Fi® networks require you to log in to a web page before you can get access.
Contact the relevant Wi-Fi® network administrator for more information.
The signal strength of Wi-Fi® networks can differ. Moving closer to the Wi-Fi® access
point increases the signal strength.
Available Wi-Fi® networks may be open or secured:
•
Open networks are indicated by next to the Wi-Fi® network name.
•
Secured networks are indicated by next to the Wi-Fi® network name.
FCC Caution: Your device can only connect to an FCC-approved access point when using 5
GHz WLAN for indoor and outdoor operation. This is because operation in the 5.15 GHz to
5.25 GHz frequency band is only permitted for indoor use.
Some Wi-Fi® networks do not show up in the list of available networks because they do not
broadcast their network name (SSID). If you know the network name, you can add it manually
to your list of available Wi-Fi® networks.
To turn on Wi-Fi®
1
From your Home screen, tap .
2
Find and tap
Settings
.
3
Drag the slider beside
Wi-Fi
to the right to turn on the Wi-Fi® function.
It may take a few seconds before Wi-Fi® is enabled.
To connect to a Wi-Fi® network automatically
1
Make sure the Wi-Fi® function is turned on.
2
Drag the status bar downward, then tap .
3
Tap
Wi-Fi
. All available Wi-Fi® networks are displayed.
4
Tap a Wi-Fi® network to connect to it. For secured networks, enter the relevant
password. is displayed in the status bar once you are connected.
Tap and then tap
Scan
to search for new available networks.
To add a Wi-Fi® network manually
1
Make sure the Wi-Fi® function is turned on.
2
Drag the status bar downward, then tap .
3
Tap
Wi-Fi
.
4
Tap .
5
Enter the
Network SSID
information.
6
To select a security type, tap the
Security
field.
7
If required, enter a password.
8
Tap
Save
.
Contact your Wi-Fi® network administrator to get the Network SSID and password.
Wi-Fi® settings
When you are connected to a Wi-Fi® network or when there are Wi-Fi® networks
available in your vicinity, it is possible to view the status of these networks. You can
also enable your device to notify you whenever an open Wi-Fi® network is detected.
If you are not connected to a Wi-Fi® network, your device uses a cellular data
connection to access the Internet (if you have set up and enabled a cellular data
connection on your device). By adding a Wi-Fi® sleep policy, you can specify when to
switch from Wi-Fi® to cellular data.
27
This is an Internet version of this publication. © Print only for private use.
