XBR-65X950B 17
SECTION 3 - REPAIR INFORMATION
12. Clear the
Self Check
screen.
a. Press
POWER
to exit
Service Mode.
b. Press the following buttons on the
Remote Commander
within
1 second of each other:
DISPLAY
Channel
5
Volume
-
POWER
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
120123132522 120123113645 --------------------- 02
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- -------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Registro de Errores
c.
To clear the error history and error count press
8
0
.
d.
Press
POWER
to exit the
Self Check
screen.
13.
Cycle AC Power (Unplug and plug AC Cord from the outlet).
REPLACING THE POWER SUPPLY BOARDS
1.
Locate both Power Supply Boards, disconnect all connectors, then
remove 5 screws from G3 Board and lift as shown to detach.
2.
Remove screws from G4 Board, then lift as shown to detach from TV.
3.
Locate the Sheet Insulation and lift as shown to detach.
4.
Install the new Power Supply Board, Sheet Insulation, screws and
connectors.
5.
Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the
Sony
Authorized Service Portal
website.
a.
Insert the USB device with the latest Software into the TV.
b.
Press
POWER
to turn on the TV.
c.
Wait until the Software update is complete and the TV turns OFF.
