XBR-65X950B 14
SECTION 3 - REPAIR INFORMATION
REPLACING THE MAIN BOARD AND TUNER BOARD
The Main Board and Tuner Board used in this model are available for
repair. For Part Number information refer to
Section 4 - Exploded View/Part
Number Information on page
21.
1.
Slide the Side Bracket as shown to detach from the Main Board.
Side
Bracket
Side
Bracket
2.
Locate and disconnect all connectors. Then remove all screws from
the Main Board Plate to detach.
3.
Locate the K0 Board and remove 4 screws, then lift as shown to detach.
K0 Board
K0 Board
4.
Locate and remove 4 screws from the Tuner Board, release the clip and
lift as shown to detach.
Tuner Board
Tuner Board
CAUTION: Do not hit or press the clips located on the Back Chassis
while installing and/or replacing new parts. Pressure on the clips may
detach them from the Back Chassis.
Please refer to the illustration below for clip location.
Clip
Covered Clip
Covered Clip
5.
Remove 1 screw from the Bracket, AC Inlet to detach as shown.
6.
Remove 2 screws from the Bracket, AC Inlet to detach the AC Inlet.
Bracket, AC Inlet
Bracket, AC Inlet
AC Inlet
AC Inlet