Sony BRAVIA VPL-VW90ES, Руководство по обслуживанию, Страница: 43 / 168

2-13 (E)
VPL-VW90ES
2-7. Memory
Memory structure consists of the following memory blocks.
1. Set
Memory
2. Status Memory
3. Video Chroma Memory
4. W/B
Memory
5. Channel Memory
6. Installation Memory
7. Picture Memory
8. RCP Memory
9. FAN Memory
10. UF Memory
11. LUT Memory
12. Sub Micro Memory
13. Panel Alignment Memory
14. Gamma Memory
When the power is turned to on to the projector, required data for the current picture, such as status mem-
ory data, etc., are selected from the respective memory blocks, and are written into the internal RAM.
When adjustment is carried out, adjustment data are written into the NVM automatically (items on the
user mode) or by the trigger of memory operation (items on the service mode), then stored them. Be
careful that the factory preset (adjusted) data of the user adjustable items are all eliminated from the
memory when user performs adjustment of the adjustable items (W/B and Device Adjust) and the memory
operation to memorize the user adjustment data into the NVM.
*
When the power to the projector is turned off without memorizing the adjustment data, the original factory preset (adjusted) data can
be restored by removing the power cord once and connect it back again.
External NVM (EEPROM) : 256 kbit
External NVM
Memory : Save the Data from
CPU RAM to NVM
Initialize : Reset the Data to default value
Active memory copy : Load the Data from NVM to CPU RAM
External NVM CPU RAM
No.01
No.02
No.03
No.04
Status
Memory
No.99
Status Memory
Set Memory Set Memory Set Memory 1.
2. No.01
No.02
No.03
No.04
No.99
No.101
Input-A
User
No.120
No.03
No.04
Component
Preset
No.99
No.03
No.04
Status
Memory
HDMI1
Preset
No.99
No.03
No.04
HDMI2
Preset
No.99
Input-A
Preset