F:\SONY STM\Sony STM 2009 Jobs\Grp S6\JC09xxxx_4137539113 Grp
S6 GB Rev\4137539113\080MEN.fm
masterpage:Left
28
GB
KLV-46/40/32W550A/40WE5
4-137-539-
11
(3)
Screen (for inputs other than a PC)
Target Inputs
Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common
Applies common settings to all inputs in which “Target
Inputs” is set to “Common”.
Name of current
input (e.g. Video
1)
Allows you to make custom settings for the input.
Wide Mode
See “To change the Wide Mode manually” (page 16).
Auto Wide
Automatically changes “Wide Mode” to match input signals. If you want to use the
setting that you specified in “Wide Mode”, select “Off”.
4:3 Default
Sets the default Wide Mode for 4:3 broadcasts.
Wide Zoom
Enlarges the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible.
Normal
Displays conventional 4:3 broadcasts in the correct
proportion.
Off
Uses the setting that you specified in “Wide Mode”.
Display Area
Adjusts the picture display area.
Auto
Automatically switches to the most appropriate display area.
Full Pixel
Displays the picture for 1080/50i, 1080/60i, 1080/50p and
1080/60p sources (HDMI or component input only) or 1080/
24p sources (HDMI input only) in the original size.
+1
Displays pictures in their original size.
Normal
Displays pictures in their recommended size.
-1/-2
Enlarges the picture so that the edges are outside the visible
display area.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when “Wide Mode” is set to “Wide
Zoom” or “Zoom”.
Vertical Size
Adjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom”.
Screen (for PC input)
Auto Adjustment
Automatically adjusts the display position, phase, and pitch of the picture when the
TV receives an input signal from the connected PC.
z
• “Auto Adjustment” may not work well with certain input signals. In such cases,
manually adjust “Phase”, “Pitch”, “Horizontal Shift”, and “Vertical Shift”.
Reset
Resets all PC screen settings to factory settings.
Phase
Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture.
010COV.book Page 28 Friday, May 29, 2009 1:59 PM
