KDL-46NX810/55NX810/55NX811/60NX810
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. G9B/G10/G11 (POWER) BOARDS, BUHT BOARD, HLT BOARD,
WIRELESS LAN CARD AND LCD PANEL ASSEMBLY REMOVAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
A-1788-127-A
BUHT BOARD, COMPLETE
NOTE: For BUHT Board replacement, please refer to section
2-2. Adjustments after Replacing the BUHT Board or LCD Panel.
NOTE: Final software is not installed on this BUHT Board.
Install the update after replacing this board using the instructions
provided with the software.
108
4-188-665-11
BRACKET, SIDE JACK
109
4-188-666-11
BRACKET, TERMINAL
110
1-474-257-11
G9B (POWER) BOARD, COMPLETE
(KDL-46NX810/55NX810/55NX811 ONLY)
111
4-188-690-01
SHEET, INSULATION (G)
(KDL-46NX810/55NX810/55NX811 ONLY)
2-990-421-41
SCREW (+PSW) (M3X6)
1-3-1. KDL-46NX810/55NX810/55NX811 ONLY
CAUTION: Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly”
on page 6.
Note: The Tape PWB (H), Side Jack Label, Terminal Label,
Insulation Sheet (G) and Attachment GL pieces are not included
with the LCD Panel Assembly and must be replaced
when replacing the LCD Panel Assembly.
A Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
B Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
C Gently peel-off Tape PWB (H) to detach from HLT Board
107
106
105
108
109
111
110
104
103
102
101
101
NA
P-MOD/T-MOD (LCD PANEL ASSEMLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
102
4-199-302-01
LABEL, TERMINAL (FOR US)
(KDL-46NX810/55NX810/60NX810 ONLY)
102
4-199-303-01
LABEL, TERMINAL (FOR LA/MX)
(KDL-55NX811 ONLY)
103
4-199-290-01
LABEL, SIDE JACK (L)
104
1-487-819-11
CARD, WIRELESS LAN
105
A-1782-538-A
HLT(STD), BOARD MOUNTED
106
4-195-059-01
TAPE, PWB (H)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
D
C
B
E
F
H
I
G
A
THE TERMINAL LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
THE SIDE JACK LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
D Remove 9 screws from BUHT
Board to detach from LCD Panel
Assembly
E Release 2 clips to detach Side
Jack Bracket from BUHT Board
F Release 2 clips to detach Terminal
Bracket from BUHT Board
G Remove 3 screws from G9B
(Power) Board to detach from LCD
Panel Assembly
H Gently peel-off
Insulation Sheet (G)
to detach from LCD
Panel Assembly
I Slide-out 2
Attachment GL
pieces to detach
from LCD Panel
Assembly
Содержание BRAVIA KDL-46NX810
Страница 2: ...SERVICE MANUAL LCD Digital Color TV AZ1 H Chassis 9 888 349 04 SelfDiagnosis Supported model ...
Страница 27: ...KDL 46NX810 55NX810 55NX811 60NX810 22 DISASSEMBLY PART NUMBER INFORMATION 1 10 2 KDL 55NX810 55NX811 ONLY ...
Страница 28: ...KDL 46NX810 55NX810 55NX811 60NX810 23 DISASSEMBLY PART NUMBER INFORMATION 1 10 3 KDL 60NX810 ONLY ...