Sony Bravia KDL-40EX520, Руководство по обслуживанию

Страница: 63 / 187

KDL-32EX421/32EX423/32EX520/32EX521/32EX523/40EX520/40EX521/40EX523/46EX520/46EX521/46EX523 57
SECTION 7 - SERVICE ADJUSTMENTS
7. Using the table, press 3 to increase the data value or
6 to decrease the data value, to select the correct
destination of the TV.
SEGMENT DATA VALUE DESTINATION DATA VALUE
P ‐ 1 I1_I5 CND U/C
LATIN AMERICA LTN/ATSC
MEXICO LTN/ATSC
US U/C
CAUTION: Verify the DESTINATION is set correctly
before proceeding to the next step. If another
destination Data Value is selected, it may possibly
corrupt the software which would require a main Board
replacement.
8. Proceed to Verifying the Model Name.
VERIFYING THE MODEL NAME
The correct model may need to be selected after updating the
software.
9. Press 1 to move to the 002 MODEL item.
DIGITAL SERVICE
002 MODEL
002 MODELNAME KDL-40EX520
10. If the correct model does not display, press 3 until the
model displayed matches the model of the TV.
11. Press MUTING then press
0
to WRITE (Save) the
changes.
12. To exit service mode, press
HOME
or turn the TV
power off.
SETTING VCOM ADJUSTMENTS
VCOM adjustments are only required if there is any flickering when
the TV is turned on.
DISPLAYING THE VCOM TEST PATTERN
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel
5
Volume
+ POWER
.
3. Press 2 to move to the 003 DIG_SRV_MODE
Category.
DIGITAL SERVICE
003 DIG_SERV_MODE
000 TEST_PATTERN