Sony Bravia KDL-26U2000, Руководство по обслуживанию

Страница: 13 / 90

– 13 –
SE-1
RM-ED007
Set-up menu
You can select the options listed below on the
Set-up menu. To select options in “Settings”, see
“Navigating through menus” (page 19).
Auto Start-up
Starts the “first time operation menu” to select the language and country/region, and
tune in all available digital and analogue channels. Usually, you do not need to do
this operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 5, 6). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house,
or to search for new channels that have been launched by broadcasters).
Language Selects the language in which the menus are displayed.
Country
Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
“Off” instead of a country/region.
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5, 6). However, this option allows you to
repeat the process (e.g., to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
Programme Sorting
Changes the order in which the analogue channels are stored on the TV.
1 Press
F
/
f
to select the channel you want to mo v e to a new position,
then press .
2 Press
F
/
f
to select the new position for your channel, then press .
AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
1 Press
F
/
f
to select the desired input source, then press .
2 Press
F
/
f
to select the desired option below, then press .
• “Equipment labels”: Uses one of the preset labels to assign a name to connected
equipment.
• “Edit”: Creates your own label.
• “Skip”: Skips an input source that is not connected to any equipment when you
press
F
/
f
to select the input source.
Sound Offset Sets an independent volume level to each equipment connected to the TV.
Set Up
Select: Enter: Exit: ME N U
A u to Start Up
Lang u age
Co u ntry
A u to T u ning
Programme Sorting
A V Preset
So u nd Offset
Man u al Programme Preset
Digital Set Up
English
Off
Back:
Digital Set-up menu
You can change/set the digital settings using the
Digital Set-up menu. To select options in
“Settings”, see “Navigating through menus”
(page 19).
Digital Tuning Displays the “Digital Tuning” menu.
Digital Auto Tuning
Tunes in all the available digital channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme List Edit
Removes any unwanted digital channels stored on the TV, and changes the order of
the digital channels stored on the TV.
1
Press
F
/
f
to select the channel you want to remo v e or mo v e to a new
position.
If you know the programme number (frequency)
Press the number buttons to enter the three-digit programme number of the broadcast
you want.
2 Remo v e or change the order of the digital channels as follows:
To remove the digital channel
Press . A message that confirms whether the selected digital channel is to be
deleted appears. Press
G
to select “Yes”, then press .
To change the order of the digital channels
Press
g
, then press
F
/
f
to select the new position for the channel and press
G
.
Repeat the procedure in steps 1 and 2 to move other channels if required.
3 Press RETURN.
Digital Manual Tuning
Tunes the digital channels manually.
1
Press the number button to select the channel number you want to
manually tune, then press
F
/
f
to tune the channel.
2 When the a v ailable channels are found, press
F
/
f
to select the channel
you want to store, then press .
3 Press
F
/
f
to select the programme number where you want to store the
new channel, then press .
Repeat the procedure above to tune other channels manually.
Set Up
Select: Enter:
Exit:
ME N U
English
Off
Back:
A u to Start Up
Lang u age
Co u ntry
A u to T u ning
Programme Sorting
A V Preset
So u nd Offset
Man u al Programme Preset
Digital Set Up