37
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-
xx
(x)
Using
Me
nu F
unc
tions
Programme Labels
Assigns a channel name of your choice, up to five letters or numbers. The name
appears briefly on the screen when you select the channel. (Names for channels are
usually taken automatically from Text (if available).)
1
Press
F
/
f
to select the channel you want to name, then press .
2
Press
F
/
f
to select the desired letter or number (“_” for a blank space), then
press
g
.
If you enter a wrong character
Press
G
/
g
to select the wrong character. Then, press
F
/
f
to select the correct
character.
3
Repeat step 2 until you finish entering the name.
4
Press to exit the labeling procedure.
Intelligent Picture
On with Indicator
Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On
Automatically reduces the picture noise.
Off
Turns off the “Intelligent Picture” feature.
Manual Programme
Preset
To preset a channel, press
PROG +/–
to select the programme number, before
selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You
cannot select a programme number that is set to “Skip” (page 38).
Programme/
System/Channel
Allows you to preset programme channels manually.
1
Press
F
/
f
to select “Programme”, then press .
2
Press
F
/
f
to select the programme number you want to
manually tune (if tuning a VCR, select channel 00), then
press .
3
Press
F
/
f
to select “System”, then press .
4
Press
F
/
f
to select one of the following TV broadcast
systems, then press .
B/G:
For western European countries/areas
I:
For the United Kingdom
D/K:
For eastern European countries/areas
L:
For France
5
Press
F
/
f
to select “Channel”, then press .
6
Press
F
/
f
to select “S” (for cable channels) or “C” (for
terrestrial channels), then press
g
.
7
Tune the channels as follows:
If you do not know the channel number
(Frequency)
Press
F
/
f
to search for the next available channel. The
search stops when a channel is found. To continue
searching, press
F
/
f
.
If you know the channel number (Frequency)
Press the number buttons to enter the channel number of
the broadcast you want to tune, or the channel number of
your VCR.
8
Press to jump to “Confirm”, then press .
Repeat the above procedure to preset other channels
manually.
Label
Assigns a name of your choice to the selected channel. This
name appears briefly on the screen when you select the
channel.
To input characters, follow steps 2 to 4 in “Programme
Labels” (page 37).
(Continued)
