Sony BRAVIA KD-48A9S, Справочное руководство

Страница: 5 / 16

C:\Users\User\Desktop\SONY
TV\NDL\SY20_NDL_HK_RG_111\Full-set\5014804111_GB\5014804111_GB.fm master page: Right
KD-48A9S
5-014-804-
11
(1)
5 GB
• Be sure to use the screws supplied with the
Wall-Mount Bracket when attaching the
Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by
illustration when measured from the attaching
surface of the Wall-Mount Bracket.
The diameter and length of the screws differ
depending on the Wall-Mount Bracket model.
Use of screws other than those supplied may
result in internal damage to the TV set or
cause it to fall, etc.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you are
ready to attach the Table-Top Stand. Keep the
screws away from small children.
* Only on limited region/country/TV model.
1
Remove the stand cover and terminal
covers.
2
Remove the screws from the rear of the
TV.
Note
• Be sure to store the removed screws and reuse when
attaching the Wall-Mount Bracket to the TV set
(SU-WL850 only). Keep the screws away from small
children.
Troubleshooting
General troubleshooting for issues like: black
screen, no sound, frozen picture, TV does not
respond, or network is lost, do the following
steps.
1
Restart your TV by pressing the power button
on the remote control for about five seconds.
The TV will restart. If the TV does not recover,
try unplugging the AC power cord (mains
lead). Then press the power button on the TV,
and release it. Wait for two minutes, and plug
in the AC power cord (mains lead).
2
Refer to the Help menu by pressing HELP on
the remote control.
3
Connect your TV to the Internet and perform
a software update. Sony recommends you to
keep your TV software updated. Software
updates provide new features and
performance improvements.
4
Visit Sony support website (information
provided at the end of this manual).
When you plug in the TV, the TV may not be
able to turn on for a while even if you press
the power button on the remote control or
the TV.
It takes time to initialize the system. Wait for
about one minute, then operate it again.
The remote control does not function.
• Replace the batteries.
9 mm – 13 mm
Screw (M6)
Wall-Mount Bracket
TV’s rear cover
ͧ
ͧ
ͦ
GB