Sony BKSI-2020, Руководство по установке

Страница: 10 / 20

1-6 (E)
BKSI-2020
3. Connection
4. Location and Function of Switches/LEDs
3-3. Signal Input/Output
Input and output signals of connector on the connector
panel are shown below.
REMOTE:RS-422A (D-sub 9-pin, Female)
<External View>
Pin No. Signal
1 FRAME GROUND
2 TX–
3 RX+
4 GROUND
5 SPARE
6 GROUND
7 TX+
8 RX–
9 FRAME GROUND
4. Location and Function of Switches/
LEDs
4-1. ENC-29 Board
n
• Do not change the setting of the switches described as
“ Factory use only ”.
• ( ) mark followed by the Ref No. shows the address of
switch or indicator on the board.
1
D3303(A-3) :System Error indicator
When an error is detected in the system control, it
lights in red.
2
D3304(A-3) :Video Error indicator
When an error is detected in the video block, it lights
in red.
3
D3305(A-4) :Audio Error indicator
When an error is detected in the audio block, it lights
in red.
4
D3307(A-4) :Test SG indicator
When the test signal generator operates in the board, it
lights in green.
5
D3306(A-4) :Input Error indicator
When an illegal signal is detected in the SDI input
connector, it lights in red.
6
D3308(A-4) :Test indicator
In the test mode (when S3000-8 is set to ON), it lights
in green.
7
D3301(A-5) :Monitor indicator
While running the monitor program, it lights in red.
<Component side/A side>
5
9
6
1
D3303
D3304
D3305
D3307
D3306
D3308
D3301
S3301
S3000
1
2
3
4
5
6
7
8
9
0
CN1101
!-
S3001