13 (E)
Fitting the Camera, Equipment and Accessories
Tripod Mounting
1
Place the unit on its side on a stable stand, so that
you have a good view of the base.
2
Attach the V-wedge shoe supplied with the tripod
to the base of the unit, using the screws supplied
with the tripod. When attaching the V-wedge
shoe, taking the total weight of this unit, the
camera, studio lens and viewfinder, and the size of
the pan and tilt head into consideration, choose a
position such that the unit will be mounted stably
on the tripod.
Note
If the feet on the bottom of the camera interfere with
the mounting of the tripod, remove them as shown
below.
Removing the front feet
3
Attach the unit to the pan and tilt head of the
tripod.
Base of the unit
Attaching a Large-lens for Studio
Use
1
Loosen the lens lock holding knob and turn the
lens lock counterclockwise.
Note
Make sure the camera mount is all the way back. If it
is in the forward position, it will be impossible to turn
the lens lock.
2
Remove the Front cover of the lens attachment
section.
3
Insert the pin on the rear of the lens into the U-
shaped notch on the front of the unit, and catch the
lens edge on the projection of the unit.
4
Push the rear face of the lens onto the front face of
the unit, then turn the lens lock holding knob
clockwise. Make sure that the lens lock stands
back and holds the tongue-like protrusion at the
lens bottom. If not, turn the lens lock holding knob
counterclockwise to do this step again.
Front feet
Front feet
V-wedge shoe (supplied with tripod)
Lens
lock
Pin
Lens edge
U-shaped notch
Projection
Protrusion
Front cover
Lens lock
holding
knob
Lens lock and Lens lock holding knob
Lens mode switch
