Sony BKNE-1010, Руководство по обслуживанию

Страница: 10 / 72

1-4(E)
DNE-1000
1-4. Input and Output Signals of Connectors
n
(
*
1) <Controller> : indicates a controlling device.
(
*
2) <Device> : indicates a controlled device.
(
*
3) : Based on the Ethernet 10 BASE-5
(
*
4) : Based on the RS-232C
(
*
5) : Based on the RS-422A
GUI
: Ethernet 10 BASE-5
( * 3)
(D-sub 15-pin Female)
Pin No. Signal name Function
1 GND Ground
2 ECD + Collision-detection ( + )
3 ETX + Transmitted data ( + )
4 –– ––
5 ERX + Received data ( + )
6 COMMON Common ground
7 –– ––
8 –– ––
9 ECD _ Collision-detection ( _ )
10 ETX _ Transmitted data ( _ )
11 –– ––
12 ERX _ Received data ( _ )
13 + 12 V Power supply + 12 V
14 –– ––
15 –– ––
RS232C : RS-232C (
*
4) (D-sub 9-pin Male)
<Controller>
(
*
1)
Pin No. Signal name Function
1 –– ––
2 RXD Received data
3 TXD Transmitted data
4 –– ––
5 GND Ground
6 –– ––
7 RTS Request to send (Output)
8 CTS Clear to send (Input)
9 –– ––
DEVICE CONTROL from A to J
( * * * * * 6)
:
RS-422A
( * 5)
(D-sub 9-pin Female)
<Device>
(
*
2)
from VTR, data servier and local strage
(MAV-500) etc..
Pin No. Signal name Function
1 GND Ground
2 CTLA RXA Received data ( _ )
3 CTLA TXB Transmitted data ( + )
4 GND Ground
5 –– ––
6 GND Ground
7 CTLA RXB Received data ( + )
8 CTLA TXA Transmitted data (
_
)
9 GND Ground
(
*
6) : When BKNE-1030 (IF-609 board) is attached to
DNE-1000, it is possible to use the DEVICE
CONTROL from E to J.
PANEL
: RS-422A
( * 5)
(D-sub 15-pin Female)
<Device>
( * 2)
from control panel BKNE-1010.
Pin No. Signal name Function
1 GND Ground
2 PANEL RXB Received data ( + )
3 PANEL RXA Received data ( _ )
4 PANEL TXB Transmitted data ( + )
5 PANEL TXA Transmitted data (
_
)
6 –– ––
7 –– ––
8 GND Ground
9 GND Ground
10 METER + Data for level meter + ( * 7)
11 + 12 V Power supply + 12 V
12 METER _ Data for level meter _ (
*
7)
13 + 12 V Power supply + 12 V
14 + 12 V Power supply + 12 V
15 GND Ground
( * 7) : The meter signals of the pin numbers 10 and 12 are
used for BKNE-1011.