1-20 (E)
MAV-70
1-7. Upgrading the ROM on Board (When no macro function is used)
1-7-7. FSE CPU
1.
Activate Tera Term.
2.
Press the
[ENTER]
key.
(“FSE>” is displayed.)
3.
Enter “VER” and confirm the CPU name and current software version.
4.
Enter “q”.
(“MON>” is displayed.)
5.
Enter “FLASH ERASE USER”.
(The software in the old version is erased and the CPU is reset automatically.)
6.
Enter “FL”.
(“Load Mode” is displayed.)
7.
Select “File”
_
“Sendfile” from the top menu.
8.
Select the file (“FSE
***
.mot”) to be downloaded.
9.
Downloading is executed.
c
Never touch the screen until downloading is completed. If downloading is interrupted because of
touching the screen, repeat steps 5 and later.
10. After downloading is completed, “OK” is displayed.
11. Enter “RES” and confirm that a message is displayed on the screen.
(The program in a new version is executed.)
(“FSE>” is displayed.)
1-7-8. DP CPU
n
Make preparations (for DP-269 board) while referring to Section 1-6.
1.
Activate Tera Term.
2.
Press the
[ENTER]
key.
(“MON>” is displayed.)
3.
Enter “VER” and confirm the CPU name and current software version.
4.
Enter “FLASH ERASE USER”.
(The software in the old version is erased and the CPU is reset automatically.)
5.
Enter “FL”.
(“Load Mode” is displayed.)
6.
Select “File”
_
“Sendfile” from the top menu.
7.
Select the file (“CCM
***
.mot”) to be downloaded.
8.
Downloading is executed.
c
Never touch the screen until downloading is completed. If downloading is interrupted because of
touching the screen, repeat steps 4 and later.
9.
After downloading is completed, “OK” is displayed.
10. Enter “RES” and confirm that a message is displayed on the screen.
(The program in a new version is executed.)
(“DP>” is displayed.)
