1-6 (E)
MAV-2000
1-4. Installation of Option Boards
4.
Fix the BKMA-2010 using the two screws that were
securing the blank panel and the supplied two screws.
5.
Attach the BKMA-2010 (DPR board) in the same way.
6.
Change the combination of the blank panels so that all
slots are not released.
7.
Fully loosen the three screws (with drop-safe) and
open the front panel.
8.
Remove the eight screws (PSW3
x
6) and remove the
board fixing plate.
BVTT3
x
6
BVTT3
x
6
Blank panels 4U
Blank panel 2U
RK4
x
16
PSW3
x
6
Front panel
Board fixing plate
9.
Insert the BKMA-2010 (DM board) into the slot. Push
in the board in the direction of the arrow to connect it
to the mother board completely.
10. After connecting the board, push the levers in the
direction of the arrow to lock them.
11. Attach the board fixing plate.
12. Unlock the stopper on the front panel, close the front
panel, and tighten the three screws (with drop-safe).
Lever
Lever
DM board
Stopper
Stopper
