22
DEGAUSS
SDI EXIST
1 216
WRITE
6
Press the DEGAUSS button again
while “WRITE” is displayed.
The “*” appears momentarily,
then disappears.
If the setting has been properly
completed, “ ” appears to the left
of “1.” This indicates that the
service mode status has been
rewritten.
7
Press the DEGAUSS and ENTER/
SELECT buttons at the same time.
This terminates the service mode.
8
Press the INPUT C switch. Make
sure the indicator (orange) has
been turned on.
You can input the HD SDI signals.
ENTER
SELECT
DEGAUSS
INPUT
C
Rewriting the Service Mode Status
