15
Installing the Input Adaptor
Install the input adaptor in the follow-
ing order:
1
Power block
2
GC board
3
B block
Before Installing the
Input Adaptor
1
Remove the 12 screws that lock
the rear cover of the monitor.
Remove the fan connector on the
rear cover.
2
Slide the rear cover back, then lift
and remove it.
3
Pull the main bracket forward a
little. Remove the screws on the G
board and remove the cable
between the terminal board and
the G board. (PHM-20M8U)
4
Remove the screws on the G
board and remove the G board.
5
Install the G board as figure
below.
1
2
Fan connector
Screw M4
×
8 (3)
Screw
BVTP4
×
16 (4)
Screw
BVTT4
×
12 (2)
Screw M4
×
8 (3)
3
4
G board
Screw
BVTP 3
×
12
Main
bracket
Screw
BVTT 4
×
8 (2)
G board
5
