Sony BKM-17R, Руководство по эксплуатации

Страница: 15 / 19

Connections
15
Connecting One Monitor
1
Turn off the power switch of the monitor before
connecting the unit.
2
Set the NETWORK switch of the monitor and the
unit to PEER TO PEER.
3
Connect the LAN (10/100) connector of the
monitor and the LAN (10/100) connector of the
unit by using the SMF-17R20 or the cable supplied
with the controller attachment stand such as BKM-
37H, or a 10BASE-T/100BASE-TX straight LAN
cable (shielded-type, optional).
Note
When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
noises.
4
Connect the DC 12V OUT connector of the
monitor and the DC 12V connector of the unit by
using the SMF-17R20 or the cable supplied with the
controller attachment stand such as BKM-37H.
Or connect the output cable of the AC adaptor
supplied with the unit to the DC 12V connector of
the unit.
Connecting the Multiple Units with
the LAN
The unit controls up to 32 monitors. Up to three units
are connected to one monitor in single mode.
Note
The unit cannot control monitors in another
subnetwork.
1
Turn off the power switch of the monitor before
connecting the units.
2
Connect to the network by using a 10BASE-T/
100BASE-TX cable (shielded-type, optional).
Monitor
NETWORK switch:
Set to PEER TO PEER.
DC 12V connector
LAN (10/100)
connector
SMF-17R20, etc.
LAN (10/100)
connector
BKM-17R (this unit)
NETWORK switch:
Set to PEER TO PEER.
DC 12V OUT
connector
Monitor Monitor
NETWORK switch:
Set to LAN. NETWORK switch:
Set to LAN.
LAN (10/100)
connector
LAN (10/100)
connector
Switching hub
(recommended:
with AUTO MDI/
MDI-X function)
AC adaptor
(supplied with this
unit)
LAN (10/100)
connector
DC 12V
connector
BKM-17R (this unit)
NETWORK switch:
Set to LAN.