7
3
Adjust the “Contour” parameters.
• Left knob (“Clip”): reference level for outline extraction (0
to 100%)
• Right knob (“Mix”): mix amount for input video (0 to
100%)
4
Adjust the “Chroma gain” parameters.
• Left knob (“Gain”): chroma gain of sketch image (–100 to
+100%)
5
To interchange the outline portions and non-outline portions,
press F3 (NEGA).
6
To apply a single hue to the outline portions, press F4 (EDGE
FLAT), turning it on, and to use a progressively changing hue
press F5 (EDGE HUE ROT), turning it on, then adjust the
parameters.
For details of the parameter settings, see the section
“Selecting the border color or edge intensity” (page 4).
Applying a drawing effect – F1 (SKETCH) to F8
(CANVAS FRM MEM)
Use the following procedure.
1
Press F1 (SKETCH), turning it on.
2
Press F2 (MODE), to select “DRAW1” or “DRAW2”.
DRAW1: use a two-valued outline extraction signal.
DRAW2: use a continuous outline extraction signal.
The soft key indications appear as follows.
SKETCH
NEGA
MODE
EDGE
FLAT
EDGE
HUE ROT
CANVAS
FLAT
CANVAS
HUE ROT
CANVAS
FRM MEM
SKETCH menu soft key indications (“DRAW1” or “DRAW2” mode)
(Continued)
