52
GB
BDV-E3200
4-446-734-
81
(1)
D:\NORM'S JOB\SONY HA\SO130046\BDV-
N9200_7200_5200_E3200\4446734811_GB (E3200)\100ADD.fm
masterpage: Left
appears without any messages on
the entire TV screen.
t
Contact your nearest Sony dealer or
local authorized Sony service
facility.
There is no picture or the picture is not
output correctly.
t
Check the output method on your
system (page 17).
t
Hold down
N
and VOL – on the unit
for more than 5 seconds to reset the
video output resolution to the
lowest resolution.
t
For BD-ROMs, check the [BD-ROM
24p Output] settings in [Screen
Settings] (page 42).
There is no picture when you make an
HDMI cable connection.
t
The unit is connected to an input
device that is not HDCP (High-
bandwidth Digital Content
Protection) compliant (“HDMI” in
the front panel does not light up)
(page 17).
The dark area of the picture is too dark/
the bright area is too bright or
unnatural.
t
Set [Picture Quality Mode] to
[Standard] (default) (page 32).
Picture noise appears.
t
Clean the disc.
t
If the picture output from your
system goes through your
equipment to get to your TV, the
copy-protection signal applied to
some BD/DVD programs could
affect picture quality. If you still
experience problems even when
you connect your unit directly to
your TV, try connecting your unit to
the other input jacks.
An image is not displayed on the entire
TV screen.
t
Check the setting of [TV Type] in
[Screen Settings] (page 42).
t
The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV
screen.
t
If the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters from
the TV set.
t
If the color irregularity persists, turn
off the TV set once, then turn it on
after 15 to 30 minutes.
t
Make sure that no magnetic object
(magnetic latch on a TV stand,
health care device, toy, etc.) is
placed near the speakers.
There is no sound.
t
The speaker cords are not
connected securely.
t
Check the speaker settings
(page 37).
There is no sound from the TV via the
HDMI (OUT) jack when using the Audio
Return Channel function.
t
Set [Control for HDMI] in [HDMI
Settings] of [System Settings] to
[On] (page 45). Also, set [Audio
Return Channel] in [HDMI Settings]
of [System Settings] to [Auto]
(page 45).
t
Make sure that your TV is
compatible with the Audio Return
Channel function.
t
Make sure that an HDMI cable is
connected to a jack on your TV that
is compatible with the Audio Return
Channel function.
Picture
Sound
