17(EN)
3
Keep pressing the REFRESH
button for about a second.
When the display is not backlit,
press down the button twice to
start refreshing. Normal charging
starts automatically after the
refresh is completed.
4
To refresh more battery packs,
repeat steps 2 and 3.
When you check the information
of the battery pack being
refreshed, “REFRESH” indication
lights up; when you check the
information of the battery pack
waiting to be refreshed,
“REFRESH” and “WAIT”
indications light up in the display.
To cancel refreshing the battery
pack
When the REFRESH MANUAL/
AUTO selector is set to “AUTO,” set
it to “MANUAL,” then remove the
battery pack from the battery charger,
and then reattach it. When you
reattach the battery pack, normal
charging starts. While refreshing the
battery pack manually, you can also
keep pressing the REFRESH button
for about a second to cancel
refreshing.
Notes
• The time to take for refreshing
depends on the remaining capacity of
the battery pack. For shorter
refreshing time, it is recommended to
discharge the battery pack
completely before refreshing it.
• The charger detects the output
voltage of the attached battery pack.
If the voltage of the battery pack is
above certain level, the battery pack
is assumed that refreshing is
unnecessary. In this case, refreshing
does not take place even if the
REFRESH button is pressed and
normal charging starts, instead.
• You cannot refresh the lithium ion
battery packs.
