Sony BC-L70A, Руководство по эксплуатации

Страница: 26 / 124

26 Charging
When you use the BC-L70A, be sure to
stand it vertically, as shown in the figure on
the left, to avoid problems such as over
heating.
About the charging indicator
The charging indicator shows the charging
status, as shown in the table below.
When an abnormality is detected
while charging
When one of the following conditions is
detected while charging, the orange and
green charge indicators flash alternately,
and charging is canceled to protect the
battery pack.
• After the start of charging, the voltage of
the DC output for battery charging has
dropped below the specified level (6 V).
• After the start of charging, the voltage of
the DC output for battery charging has
exceeded the specified level (17.5 V).
• The battery voltage did not rise to the
specified level within a specified period
(2 hours).
The charging indicators remain flashing
until the AC power cord is disconnected, or
the battery pack is removed.
• When a battery pack that is not
chargeable with the BC-L70A is
connected, charging does not take place.
• The BP-M50/M100 Nickel Metal
Hydride Battery Packs cannot be charged
with the BC-L70A.
Battery pack Charging time to
full capacity
BP-GL95B About 90 minutes
BP-FL75/FLX75 About 65 minutes
Note
Indicator Charging status
Flashing
(orange) Charging (less than 90%
capacity)
Flashing
(green) Charging (between 90%
and 100% capacity)
Lit (green) Fully charged
Flashing
(orange
t
green t off)
Charging standby state
(internal temperature of
battery is 0 °C (32 °F)
and lower or 60 °C
(140 °F) and higher)
Flashing
rapidly
(orange and
green) Error detected during
charging (For details, see
“When an abnormality is
detected while charging”
below.)
Notes