Sony 4-181-486-11(2), Руководство по эксплуатации

Страница: 40 / 180

40
US
• Even if the system is turned off (active standby
mode), the HDMI signal will be sent from the
connected component to the TV via the HDMI
connection. You can enjoy image and sound of the
component on the TV.
• Depending on the TV, the start of the content may not
be output.
You can enjoy the TV sound from the speakers
of the system by means of a simple operation.
You can also adjust the volume and turn off the
sound of the system using the TV remote. For
details, refer to the operating instructions of the
TV.
Press
?/1
to turn on the system.
The sound is output from the speaker of the
system. Sound output reverts to the TV's speaker
when you turn the system off.
• When the TV is turned on before this system is turned
on, the TV sound will not be output for a moment.
• Depending on the TV, when you adjust the system’s
volume using TV’s remote, the volume level appears
on the TV screen, in the same way it would appear
when you adjust the TV’s volume. In this case, the
volume level that appears on the TV screen and the
system’s front panel display may differ.
Using the Volume Limit
function
When the System Audio Control function is
active and the output method changes from the
TV speaker to the system speakers
automatically, loud sound may be output
depending on the volume level of the system.
You can prevent this by limiting the volume
level.
1
Press AMP MENU.
2
Press
X
/
x
repeatedly until “SET HDMI”
appears, then press or c .
3
Press
X
/
x
repeatedly until “VOL LIMIT”
appears, then press or c .
4
Press X / x to select the volume limit you
want.
The volume limit changes as follows:
5
Press AMP MENU.
The AMP menu turns off.
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the system speakers to the TV speaker.
• We recommend that you set the volume limit to a little
lower than the volume you usually listen to.
• Regardless of the volume limit you set, the VOLUME
+/– buttons of the system and the MASTER VOL +/–
buttons of the remote are operable.
• If you do not want to limit the volume level, select
“MAX.”
Tip
Note
Enjoying the TV sound
from the system
(System Audio Control)
?/1
AMP
MENU
C
,
X
,
x
,
c
,
Notes
Notes
Tips
MAX y 49 y 48 … 2 y 1 y MIN