20
*
When the unit is turned off.
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect to the unit.
*
Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1
Turn down the volume on the unit.
2
Press
(SOURCE)
repeatedly until “AUX”
appears.
After that, “AUX FRONT IN” appears.
3
Start playback of the portable audio device at a
moderate volume.
4
Set your usual listening volume on the unit.
5
Adjust the input level (page 19).
AUX-A
* (AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 20).
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: “NO,” “30S
(Seconds),” “30M (Minutes),” “60M (Minutes).”
DEMO
(Demonstration)
Activates the demonstration: “ON,” “OFF.”
DIMMER
Changes the display brightness.
– “AT”: to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
– “ON”: to dim the display.
– “OFF”: deactivate the dimmer.
CONTRAST
Adjusts the contrast of the display. The contrast
level is adjustable in 7 steps.
ILLUMI
(Illumination)
Changes the illumination color: “ILLUMI-1,”
“ILLUMI-2.”
M.DSPL
(Motion Display)
Selects the Motion Display mode.
– “SA”: to show moving patterns and spectrum
analyzer.
– “ON”: to show moving patterns.
– “OFF”: to deactivate the Motion Display.
A.SCRL
(Auto Scroll)
Scrolls long items automatically: “ON,” “OFF.”
ZAP.TIME
(Zappin Time)
Selects the playback time for the ZAPPIN
function.
– “ZAP.TIME-1 (about 6 seconds),”
“ZAP.TIME-2 (about 9 seconds),”
“ZAP.TIME-3 (about 30 seconds).”
LPF
(Low Pass Filter)
Selects the subwoofer cut-off frequency: “OFF,”
“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”
LPF NORM/REV
(Low Pass Filter Normal/
Reverse)
Selects the subwoofer phase: “NORM,” “REV.”
HPF
(High Pass Filter)
Selects the front/rear speaker cut-off frequency:
“OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,”
“160Hz.”
LOUD
(Loudness)
Reinforces bass and treble for clear sound at low
volume levels: “ON,” “OFF.”
BTM
TAG ERASE
AUX
Connecting cord
*
(not supplied)
Содержание 4-168-227-11(1)
Страница 27: ......
