Sony 4-144-907-43(1), Руководство по эксплуатации

Страница: 98 / 136

98
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm masterpage: Left
STR-DA3500ES
4-144-907-
43 (1)
About the indicators on the display window
HDMI
LFE
S W
L C R
S L S S R
S B L S B S B R
MULTI IN
COAX OPT D + EX TrueHD Neural THX DT S D.RANGE B S LEEP + A S P E S 96 24
/ - -
DT S - HD M S TR HI RE S NEO:6 PL ll MEM MONO S T RD S
X
DMPORT ANALOG LPCM EQ - Bl AMP A.DIRECT
ZONE 2 3
Name Function
A
SW
Lights up when subwoofer is
connected and the audio signal
is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a subwoofer
signal based on the LFE signal
in the disc being played back or
the low frequency components
of the front channels.
B
LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C
COAX
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
D
OPT
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
E
; D/
; D EX/
; D+/
; TrueHD
“
;
D” lights up when the
receiver is decoding Dolby
Digital signals.
“
; D EX” lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
“
;
D+” lights up when the
receiver is decoding Dolby
Digital Plus signals.
“
; TrueHD” lights up when
the receiver is decoding Dolby
TrueHD signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO” (page 93).
F
Neural - THX Lights up when the receiver
applies Neural - THX
processing to input signals.
G
DTS/
DTS-ES/
DTS 96/24 “DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when
the receiver is decoding DTS
96 kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 93).
H
D.RANGE Lights up when dynamic range
compression is activated.
Name Function