Sony 4-144-907-43(1), Руководство по эксплуатации

Страница: 102 / 136

102
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm masterpage: Left
STR-DA3500ES
4-144-907-
43 (1)
Using a bi-amplifier
connection
If you are not using the surround back
speakers, you can use the SPEAKERS
SURROUND BACK terminals for the front
speakers in a bi-amplifier connection.
To connect the speakers
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK terminals.
Make sure that the metal fittings of Hi/Lo
attached to the speakers have been removed
from the speakers. Otherwise, it may cause the
receiver to malfunction.
To set up the speakers
Set “Sur Back Assign” to “BI-AMP” in the
Speaker settings menu. The same signals
output from the SPEAKERS FRONT A
terminals can be output from the SPEAKERS
SURROUND BACK terminals by setting “Sur
Back Assign” to “BI-AMP”.
Notes
• You cannot use the SPEAKERS FRONT B
terminals for a bi-amplifier connection.
• Set “Sur Back Assign” to “BI-AMP” before you
perform Auto Calibration.
• If you set “Sur Back Assign” to “BI-AMP”, the
speaker level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
• Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
• If you set “Speaker Pattern” to a setting with
surround back speakers, you cannot set “Sur Back
Assign” to “BI-AMP”.
Front speaker
(R)
Front speaker
(L)
Hi
Lo
Hi
Lo