34
GB
a)
For details, refer to the page in the parentheses.
b)
“CONTROL FOR HDMI” scroll across the display, then “CONTROL” appears.
c)
This parameter is only available when the result of the Auto Calibration is saved.
d)
When the Auto Calibration result is saved, you can adjust the setting in 0.01 meter increment.
e)
This parameter is only available when SAT input is selected.
f)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
g)
This parameter is only available when using the EZW-T100A wireless transceiver (for model of area code
CEL, CEK only).
Menu
[Display]
Parameters
[Display]
Settings
Initial setting
S-AIR settings
[S-AIR]
S-AIR ID
f)
[S-AIR ID]
ID A, ID B, ID C
ID A
PAIRING
f)
[PAIRING]
START, CONDIN
START
S-AIR mode
f)
[MODE]
PARTY, SEPARATE
PARTY
RF Change
f)
[RF CHNG]
RF AUTO, RF ON, RF OFF
RF AUTO
RF Power
f)g)
[RF POWER]
PWR HIGH, PWR LOW
PWR HIGH
S-AIR standby
f)
[STBY]
STBY ON, STBY OFF
STBY OFF
