27
GB
Ge
tt
ing St
ar
te
d
8: Adjusting the speaker
levels
(TEST TONE)
You can adjust the speaker levels while
listening to the test tone from your listening
position.
1
Press AMP MENU.
“SET HDMI” appears on the display.
2
Press
V
/
v
repeatedly until
“LEVEL” appears, then press
or
b
.
3
Press
V
/
v
repeatedly until
“T. TONE” appears, then press
or
b
.
4
Press
V
/
v
repeatedly to select
“T. TONE Y”, then press
.
The test tone is output from each speaker
in sequence as follows:
Front left
t
Center
t
Front right
t
Surround right
t
Surround left
t
Subwoofer
5
Press
B
until “T. TONE”
appears.
6
Press
V
/
v
repeatedly to select
the desired speaker, then press
or
b
.
The test tone is emitted from the speaker
that is being adjusted only.
• FL LVL: adjusts the front left speaker
level.
• CNT LVL: adjusts the center speaker
level.
• FR LVL: adjusts the front right speaker
level.
• SR LVL: adjusts the surround right
speaker level.
• SL LVL: adjusts the surround left
speaker level.
• SW LVL: adjusts the subwoofer level.
Notes
• “CNT LVL” does not appear when you set
“CNT N” in the “SP SETUP” setting.
• “SR LVL” and “SL LVL” do not appear when
you set “SUR N” in the “SP SETUP” setting.
7
Press
V
/
v
repeatedly to adjust
the speaker level, then press
or
b
.
You can adjust from –6.0 dB to +6.0 dB
in 0.5 dB steps.
Note
If you do not adjust for a certain period, the test
tone is emitted from the next speaker in
sequence.
8
Repeat step 6 and 7 to adjust
the other speaker level.
9
After you have finished making
adjustments, press
V
/
v
until
“T. TONE” appears, then press
or
b
.
10
Press
V
/
v
repeatedly to select
“T. TONE N”, then press
.
11
Press AMP MENU.
The AMP menu turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
• The test tone signals are not output from the
HDMI OUT jack.
0
ENTER
RETURN/EXIT
AMP MENU
CLEAR
DISPLAY
TOOLS/
OPTIONS
MENU/HOME
AMP
MENU
2
+/–
,
V
,
v
,
B
,
b
