ICD-SX700/SX800 4-127-580-11(1)
1
GB
Re
co
rd
in
g
Cutting out Low
Frequency – the LCF
Function
,
/MENU
When you set the LCF (Low Cut Filter)
function to “ON” in the stop or recording
mode, you cut out a frequency of lower
than 200 Hz to reduce the roaring noise
from wind, etc., this helps to record a
sound source more clearly.
The LCF function is set to “OFF” when you
purchase the IC recorder.
1
Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
2
Press
or
to select “LCF
(LOW CUT),” then press
.
3
Press
or
to select “ON,”
then press
.
4
Press
(stop) to exit the menu
mode.
To cancel the LCF function
Set “LCF (LOW CUT)” to “OFF” in step 3.
