Sony 3026 Скачать руководство пользователя страница 58

Страница: 58 / 126

Command Descriptions

2Ć42

3026 Programmer Manual

MMEMory:SORT (?)

The

MMEMory:SORT

command sets the display order for file information in disk

directory listings. The

MMEMory:SORT?

query returns the display order for file

information in disk directory listings.

MEMORY

None

MMEMory:SORT {NAME1|NAME2|TIME1|TIME2}

MMEMory:SORT?

NAME1

orders the display according to the ASCII values in the file
names (mostly alphabetic order).

NAME2

orders the display in the reverse order of the NAME1 order.

TIME1

orders the display with older (Date and Time) files first.

TIME2

orders the display with more recent (Date and Time) files first.

{NAME1|NAME2|TIME1|TIME2}

:MMEMORY:SORT NAME1

sets the order of file information recorded in disk directory listings to alphabeti-
cal order by file name.

MMEMory:SSETUP

The

MMEMory:SSETUP

command saves the instrument setup to a disk file or the

specified register.

MEMORY

MMEMory:RSETUP

MMEMory:SSETUP {<string>|D1|D2|D3|D4}

Group

Related Commands

Syntax

Arguments

Responses

Examples

Group

Related Commands

Syntax

Содержание 3026































































































































Результаты поиска

Содержание 3026

Отзывы:

Sony 3026, Руководство программиста, Страница: 58 / 126

Результаты поиска

Содержание 3026

Отзывы: