27
GB
Getting Star
ted
* If your TV accepts progressive format signals, use this connection and set the output signal of the system to
progressive format (page 37).
** HDMI (High-Definition Multimedia Interface)
If your TV has the HDMI jack, use this connection and select the type of output signal (page 36).
Note
• During the “DMPORT” function, video signal is not output from the HDMI OUT and COMPONENT VIDEO OUT
jacks.
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. If the digital
signal ceases, the analog signal will be processed after 2 seconds.
• When connecting the HDMI cable, make sure that the direction of jacks are the same.
• When connecting the digital optical cord, insert the connector until it clicks into place.
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV (AUDIO
IN) jacks (
A
) or TV (DIGITAL IN OPTICAL) jack (
B
) instead of the TV.
DMPORT
P
B
/C
B
P
R
/C
R
Rear of the control unit
To the VIDEO I
N
jack of
the TV
To the digital optical output
jack of the TV
Component video cord
(not supplied)
*
Video cord
(supplied)
HDMI
**
cable
(not supplied)
Audio cord
(not supplied)
Green
Blue
Red
W
hite
Red
To the AUDIO OUT jacks of
the TV
Digital optical cord
(not supplied)
To the HDMI I
N
jack
of the TV
To the COMPO
N
E
N
T VIDEO I
N
jacks of the TV
