background image

60

GB

1

Press DMPORT.

You can also use the INPUT SELECTOR 
on the receiver to select “DMPORT”.

2

Start playback of the connected 
component.

The sound is played back on the receiver 
and the image appears on the TV.
For details, refer to the operating 
instructions supplied with the DIGITAL 
MEDIA PORT adapter.

Notes

• Depending on the type of DIGITAL MEDIA 

PORT adapter, you can operate the connected 
component by using the remote. For details on 
remote button operation, see page 8.

• Be sure you have made the video connection from 

DIGITAL MEDIA PORT adapter to the TV (page 
59).

• Depending on the DIGITAL MEDIA PORT 

adapter, video output may not be possible.

Tip

When listening to MP3 or other compressed music 
using a portable audio source, you can enhance the 
sound. Press MUSIC repeatedly to select 
“PORTABLE” (page 44).

Using the Sleep Timer

You can set the receiver to turn off 
automatically at a specified time.

Press SLEEP repeatedly while the 
power is on.

Each time you press the button, the display 
changes cyclically as follows:

2-00-00 

1-30-00 

1-00-00 

0-30-00 

OFF

When sleep timer is activated, the display dims 
and “SLEEP” indicator lights up.

Note

If you press any buttons on the remote or receiver 
after the display dims, the display brightens up. 
After a while, the display dims again if no button is 
pressed. 

Tip

To check the remaining time before the receiver 
turns off, press SLEEP. The remaining time appears 
on the display. If you press SLEEP again, the sleep 
timer will be canceled.

Listening/watching a connected 
component through DMPORT 
connection

Содержание 3-295-946-12(1)









































































Отзывы: