46
Setting up WAP
Preferred service
You can set GPRS or GSM as the preferred service.
Note:
To see the status of GPRS coverage and
connection, in standby, look at the triangle above the
signal strength indicator. If the triangle is filled
GPRS is available, otherwise it is not.
To select preferred mode
YES
,
,
YES
,
,
YES
, and select
.
WAP profile settings
The WAP settings are stored in a WAP profile. In
most cases you only need to use one profile to access
the Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such
as a banking site or a corporate intranet. You then
simply switch between profiles when you need to
change the network connection.
To enter WAP profile settings manually
1.
Make sure you have a data account set up between
your phone and the Internet server, as described in
“Data account settings” on page 44.
2.
Scroll to
YES
,
YES
,
YES
.
3.
Select
to add a new profile or select an
existing profile that you want to edit,
YES
.
To enter information in a new profile
When selecting
enter a name for the
profile,
YES
YES
, select the data
account to be used,
YES
and enter the
YES
. A list appears. Scroll to
,
YES
.
To edit an existing profile
When selecting an existing profile, you can do
the following:
•
– Change the name of the profile.
•
– Select data account.
•
– WAP gateway server address.
•
– More profile settings, see below.
•
– Remove the profile.
This is the Internet version of the user's guide. © Print only for private use.
