Working Instruction
,
Mechanical
1208-3927 2
©
Sony Ericsson Mobile Communications AB
4(79)
ESD EQUIPMENT
Protect the phone from ESD damage whenever it has been
opened:
Minimum requirements are:
•
ESD
wristband
•
ESD
gloves
•
ESD
mat
LABEL EQUIPMENT
The following special equipment is required when replacing
or installing a new label:
•
Zebra printer connected to computer
1.3 General
Cautions
The following cautions are considered to be generic for all products and will not be repeated in the
Disassembly, Reassembly, and Replacements sections:
•
S
WITCH OFF THE PHONE AND REMOVE ANY MEMORY STICK BEFORE THE START OF THE DISASSEMBLY
!
•
K
EEP ALL CONTACT SURFACES CLEAN
!
•
B
E CAREFUL WHEN USING TOOLS LIKE THE DENTIST HOOK
,
TWEEZERS
,
PRY TOOLS
,
ETC
.
TO AVOID
SCRATCHES OR DAMAGE TO THE EXTERIOR AND INTERIOR PARTS OF THE PHONE
!
•
B
E CAREFUL NOT TO DAMAGE ANY CONTACT SPRINGS
!
•
R
EMEMBER TO REMOVE THE PROTECTION FILMS ON NEW PARTS SUCH AS THE FRONT COVER
AND
LCD!
•
N
EVER TOUCH THE DISPLAY GLASS
!
1.4 Adhesives
Use a dentist hook, the tweezers, and/or a nylon pointer to remove old adhesives.
Clean the surface with isopropyl alcohol before attaching new adhesives.
1.5 Using Hand and ESD Protection
When handling this product, keep all surfaces clean of dirt, dust, debris, and hand oil. Use
appropriate ESD precautions when working on this product. The use of finger cots or gloves, an ESD
mat, and an ESD wrist strap are required at minimum.
