10
Getting started
To remove the charger
1
Charge your battery until the battery
icon indicates a full charge.
2
Tilt the USB charger connector upwards
to remove it.
Note:
1
If there are two USB cables in the kit
(USB cable for charging and USB cable
for data transferring. See the illustrations
as below), then the USB cable for charging
is only intended for charging your phone.
Do not use it for transferring data.
The USB cable for the USB charger is
only intended for connection to the AC
adapter to charge your phone.
It must
not be used for connection to a PC.
It can only be used for charging your
phone. Never use it for charging
accessories.
2
If there is only one USB cable in the kit,
it is intended for charging your phone
as well as transferring data.
3
If there is only one USB cable for the
USB charger in the phone kit, this USB
cable is only intended for charging your
phone.
4
Sony Ericsson strongly recommends
that you
use only Sony Ericsson branded
original batteries, the part of power
supply device in accordance with
YD/T 1591-2006 specifications of
Communications Industry Standards
of P. R. China and the USB cable
supplied with your phone to charge the
phone.
The use of third-party products
may decrease the performance of your
phone and/or pose a risk to your health
or safety.
USB cable for charging
USB cable for transferring
You can charge the battery for more or less
than 2.5 hours. Interrupted charging will
not damage the battery.
Performance depends on temperatures,
signal strenth, usage patterns, features
selected and voice or data transmissions.
The stand-by time for this battery is up to
Use only Sony Ericsson branded original
batteries intended for use with your mobile
phone. If you use other batteries you may
not be able to charge your phone.
385 hours.
This is the Internet version of the User guide. © Print only for private use.
