Sony Ericsson T230c, Руководство пользователя

Страница: 27 / 80

This is the Internet version of the user's guide. © Print only for private use.
Calling 27
The keypad remains locked until you answer an
incoming call or until you unlock the keypad manually.
To unlock the keypad
• Press when prompted with Unlock keypad? ,
press
YES
.
Master reset
Reset settings allows you to reset all the settings in the
phone to the factory defaults. Factory defaults are not
necessarily the same settings as when you purchased
your phone.
Reset all allows you to reset all the settings in the phone
to the factory defaults, resets your data and WAP
account settings, and may delete user- downloaded
images, ringtones and templates.
Note: Before choosing Reset all, check with your
service provider.
To reset the phone
1. Scroll to Settings ,
YES
, Master reset .
2. Select Reset settings or Reset all ,
YES
.
3. Enter the phone lock code ( 0000 or the new code
if you have changed it) and press
YES
.
Calling
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
See “Holding the Phone” on page 5.
Making calls
1. Enter the area code and the phone number.
2. Press
YES
to make the call.
3. Press
NO
to end the call.
Tip: You can call numbers from the call list and
the phonebook. See “Call list” on page 30 and
“Phonebook” on page 30.
To change the earpiece volume during a call
• Press the upper or lower side volume key to increase
or decrease the earpiece volume.
To mute the microphone during a call
• Press and hold until the display shows Muted .
Press again to resume the conversation. To mute
the ringer, see “To mute the ringer” on page 29.