Working Instructions
, SP/
Mechanical
3_00021-1/FEA 209 544/78 C
Sony Ericsson Mobile Communications AB
16(23)
#
Figure
Instruction
Note
6
Fig. 2.6.5
Place the LCD assy in the
right side of the PCB; make
sure the hooks are on the
correctly side at the PCB.
The hooks should be
mounted on the opposite
side of the PCB as the LCD
assy.
(Fig. 2.6.5)
The guiding pins on the
LCD assy shall fit into
the holes on the PCB.
7
Fig. 2.6.6
Press very gently at the left
side on the LCD.
(Fig. 2.6.6)
Be careful so you don’t
damage the LCD assy.
Use gloves.
Remember to remove
the LCD protection film.
8
Fig. 2.6.7
Mount the LCD gasket on
the LCD assy.
(Fig. 2.6.7)
Be careful so you don’t
damage the LCD assy or
LCD gasket. Use
gloves.
•
Assemble the phone as described in
2 Reassembly
(
page5-6
), follow steps 1-7
