Working Instruction
,
Mechanical
3/000 21-1/FEA 209 544/86 E
Company Internal
©
Sony Ericsson Mobile Communications AB
32(43)
Step-by-Step Instructions
2
Take the camera assembly and assemble the
camera conductive gasket as the picture shows.
NOTE!
The end of the conductive gasket should be
placed by the line.
3
Press from the back of the frame on the old
camera cover with your fingers until it falls out.
4
Assemble a new camera cover from the inside of
the frame, gently push with the torx bits 6 like
the pictures shows on the edges around the
camera cover until it`s assembled in the right
position.
NOTE!
Turn the frame assembly around and check that
the camera cover edge is visible all around the
frame opening.
•
Assemble the phone as described in
2 Reassembly.
