Sony Ericsson Cyber-Shot, Руководство разработчика

Страница: 30 / 93

This is the Internet version of the user's guide. © Print only for private use.
30
Calling
To re-record a voice command
1
}
Settings
}
General
}
Voice control
}
Voice dialling
}
Edit names .
2 Select a voice command, press More
}
Replace voice .
3 Lift the phone to your ear, wait for the tone and
say the command.
Tips when recording and using voice
commands
If your phone cannot detect speech, one of the
following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you
do during a call.
• The voice command was too short – it should
be around one second long and more than one
syllable.
• You spoke too late or too soon – speak immediately
after the tone.
• You did not record the voice command when the
handsfree was attached – for voice control with
a handsfree kit, record when the handsfree is
attached.
• You used another intonation – use the same
intonation as you did when recording the voice
command.
Diverting calls
If you cannot answer incoming voice calls, you can
divert them to another number, for example, your
answering service.
You can choose between the following divert
options:
•
Divert always – divert all voice calls.
• When busy – divert calls if you are already
on the phone.
• Not reachable – divert calls if your phone
is turned off or if you are unreachable.
• No reply – divert calls that you do not answer
within a specified time limit (operator-dependent).
To activate a call divert
1
}
Settings
}
Calls
}
Divert calls .
2 Select a call type and then one of the divert
options and select
Activate .
3 Enter the phone number to which you want your
calls to be diverted, or press
Look up to find the
contact in your phonebook, OK .
When the Restrict calls function is activated,
some Divert calls options are not available.