Sonus
– Network Design Group
17 of 35
Copyright © 2015, Sonus and/or its affiliates. All rights reserved.
3.3 Internal Side SBC Configuration
Node Interfaces
The Sonus SBC 1000 allows you to configure the Identification information, Physical Data Layer, and Networking
Layer for the Ethernet ports. If you want to change the IP address, you must configure the associated
Logical
Interface
or use the
Modify Ethernet IP
task found under the Tasks tab.
Shown below are the settings for the Ethernet connection between the Sonus SBC 1000 and Lync 2013.
Node Ports
Figure 14: Node Port
