SonoSite M-Turbo, Руководство по обслуживанию

Страница: 26 / 58

22 Chapter 4: Replacement Procedures
Main System Disassembly for Repair and/or Replacement
Required Parts
Parts for the Main System Repair could include any of the following:
• P08939 Service Assembly Main PCBA, M-Turbo
• P08850 Service Assembly Power Supply, M-Turbo
• P05470 Service Assembly TGC, MicroMaxx (compatible with MicroMaxx and M-Turbo)
• P05473 Service Assembly Speaker, M-Turbo
• Nest Frame Assembly, M-Turbo (order these parts individually as necessary)
• P00364 Connector, Interposer (Qty 8)
• P00924 Screw, Shoulder, Thrust Plate (Qty 4)
• P00353 Wear Plate
• P00646 Spring, Thrust Plate (Qty 4)
• P07750 Nest Frame
• P03834 Shield, Perimeter, Long (Qty 2)
• P03833 Shield, Perimeter, Short (Qty 2)
• P08200 M2.5-.45x10 Socket Head Cap Screw (Qty 4)
Required Tools
• #1 Phillips screwdriver
• Torque screwdriver, 2.0–10.0 inch pounds (0.23–1.1 newton meter)
• 2 mm allen key
• Scissors
• Q-Tips
• An anti-static mat
• A wrist grounding strap
System Disassembly
Caution: Always use correct ESD procedures. ESD damage is cumulative and may not be noticeable at first.
Initial ESD symptoms may be slightly degraded performance or image quality.
System
Disassembly 1 Remove the battery.
2 Remove the control panel from the system following the removal procedures in “Control
Panel Removal” on page 21 .
3 Remove the 4 remaining screws from the bottom of the system.
4 Remove the bottom enclosure. This exposes all of the replaceable parts for the main system
per
Figure 4.7 .