SonoSite M-Turbo, Руководство по обслуживанию

Страница: 25 / 58

Chapter 4: Replacement Procedures 21
Control Panel Subassembly Replacement
Required Parts
One of the following:
• P08856 Service Assembly, Control Panel M-Turbo, English
• P08878 Service Assembly, Control Panel M-Turbo, French
• P08879 Service Assembly, Control Panel M-Turbo, German
• P08880 Service Assembly, Control Panel M-Turbo, Italian
• P08881 Service Assembly, Control Panel M-Turbo, Spanish
• P08882 Service Assembly, Control Panel M-Turbo, Portuguese
Required Tools
• #1 Phillips screwdriver
• Torque screwdriver, 2.0–10.0 inch pounds (0.23–1.1 newton meter)
• An anti-static mat
• A wrist grounding strap
Control Panel Removal
Control Panel Replacement
Caution: Always use correct ESD procedures. ESD damage is cumulative and may not be noticeable at first.
Initial ESD symptoms may be slightly degraded performance or image quality.
Control Panel
Removal 1 Remove the two screws from the rear of the system per Figure 4.1 .
2 Remove the two screws from the bottom of the system per Figure 4.2 .
3 Turn the system over, fully open the display, and lift off the Control Panel per Figure 4.3 .
Control Panel
Replacement 1 Place the new control panel in place.
2 Install the four screws removed in “Control Panel Removal” on page 21 . Torque the screws
to 5.5 inch pounds.