manualshive.com logo in svg

Sonosax Stelladat II, Руководство пользователя, Страница: 66 / 93

Поделиться
Скачать
Sonosax Stelladat II Скачать руководство пользователя страница 66

66

10. PROM Replacement on Stelladat II

PROM Replacement On The Motherboard (Main Software)

•

  Disconnect the external power supply.

•

  Remove the battery from the holder.

•

  Open the bottom plate of Stelladat II: Using a 2 mm hex wrench, unscrew the four feet and

the two screws.

•

  WARNING: An electrostatic discharge can destroy some electronic circuits. Avoid touching

the circuits, and before the next stage, touch the chassis of Stelladat II so as to discharge
yourself.

•

  Using a PROM extractor, delicately remove the "MASTER" identified PROM.

•

  Insert the new PROM watching that its 45° bevelled angle matches with the one on the

socket.

•

  Close the bottom plate of Stelladat II, screwing back the 2 screws and the 4 feet.

Once the PROM has been replaced, please let us know which version has been
installed and the recorder's serial number.

Содержание Stelladat II






























































































Отзывы:

Нет отзывов