Sonoro sonoroCD SO-210, Руководство по эксплуатации

Страница: 96 / 231

Malfunction Possible cause Elimination
Battery is empty Replace the battery of your remote
control (see Ä Chapter 7.5 ‘Pre‐
paring the remote control’
on page 83).
Malfunctions due to other radio
transmitters or devices
Increase the distance between the
source of interference and the
radio. Plug the device into another
socket so that the source of inter-
ference and the radio are con-
nected to different branch currents.
Alarm does not work Alarm is not switched on
Switch on the alarm (see Ä Chapter
9.5 ‘Switching on/off the alarm
clock’ on page 88).
Alarm volume is set to minimum Increase the volume (see
Ä Chapter 9.3 ‘Setting the alarm
volume’ on page 88).
Headphones are connected Pull the headphones out of the
jack.
19 Cleaning
L NOTICE!
Material damage from improper cleaning!
Only clean the device from the outside using a
dry, soft cloth. Never use abrasive or solvent-
based cleaning agents as these may damage the
surface of the device.
96